01
Batch Dry Kilns
Track and package batch kilns engineered for Southern Yellow Pine and other softwood/hardwood species. Right-sized chambers, optimized airflow, and uniform moisture content from charge to charge.
Simple · Smart · EngineeredDrying & Energy Systems
Drying & Energy Systems
Engineered for SYP
KilnTech Solutions is an industrial services and engineering partner to the Southern Yellow Pine industry. We design and deliver kiln solutions — batch and continuous, including the Dual Path Kiln — thermal and burner systems, steam and condensate infrastructure, and the controls and automation that tie it all together, with fuel and material handling support from concept through commissioning.
Built for the SYP Industry
One Engineering Partner for the Whole Kiln Field.
Southern Yellow Pine moves fast and dries hard. KilnTech designs drying and energy systems around real SYP production rates — high throughput, tight moisture targets, and predictable grade recovery — without overbuilding the package.
From the kiln shell and Dual Path airflow design to the burner, steam header, controls cabinet, and fuel feed, every component is engineered to work as one system. We support the project from feasibility and 3D layout through fabrication, installation, commissioning, and long-term service.
Parametric DPK · External-Fan · No-Rev
The Dual Path Kiln, Configured to Your Mill.
A KilnTech dual-path, counterflow no-rev kiln is modeled from proven SSE elevation and plan templates. Width, end-chamber length, sidewall height, baffle height, and end-stack height are all tuned to your production target.
The external-fan layout scales with chamber size, and the kiln-shell budget is reconciled against KilnTech's standard supply scope before a single beam is cut — so you know the system, the cost, and the airflow before commitment.
- CounterflowGreen lumber meets the warm, moist air leaving drier lumber — efficient heat transfer, lower energy per BF.
- No-RevExternal fans eliminate reversal cycles, simplify the structure, and cut maintenance.
- Parametric DesignWidth, height, baffle, and stack tuned per mill — not a one-size-fits-all chamber.
- 3D / Plan / ElevationLive model views during design so the mill can see exactly what's being built.
Capabilities
Drying, Energy, Controls & Handling.
A complete scope — engineered, fabricated, installed, and commissioned by one team.
02
Continuous Dry Kilns
High-throughput continuous kilns designed for steady-state SYP production — including counterflow Dual Path Kilns (DPK) that eliminate fan reversal and improve grade recovery.
03
Dual Path Kilns (DPK)
Parametric DPK configurations: external-fan, no-rev counterflow design. Width, end-chamber length, sidewall height, baffle height, and end-stack height are tuned to your production target and shell budget.
04
Thermal & Burner Systems
Direct-fired and indirect thermal packages, burner systems, heat exchangers, and combustion controls. Engineered to match kiln load profiles and available fuel — natural gas, wood waste, or hybrid.
05
Steam & Condensate Infrastructure
Steam generation, distribution headers, traps, condensate return, insulation, and code-compliant piping packages — sized to your kiln field and supporting plant loads.
06
Controls & Automation
PLC-based kiln controls, HMI, drying-schedule management, airflow & temperature regulation, energy and emissions monitoring, remote diagnostics, and sawmill automation tie-ins.
07
Fuel & Material Handling
Fuel feed systems for wood waste and conventional fuels, conveying, dosing, plus lumber and package handling support around the kiln field — from charge cars to transfer decks.
08
Concept Through Commissioning
We engineer, build, install, commission, and support. One partner from feasibility and 3D layout through start-up, schedule tuning, and long-term service.
Service Territory
Across North America.
KilnTech supports completed installs and active projects from the Gulf Pine Belt and Southeast hardwoods to the Pacific Northwest and Eastern Canada. Field crews dispatch within 24 hours to active service regions.
24 / 7
Coverage · NA-wide
< 24 h
Field crew dispatch
Concept → Start-Up
Single-partner delivery
At a Glance
Program Specifications
- Primary Industry
- Southern Yellow Pine (SYP) sawmills
- Also Serving
- Hardwood mills, softwood mills, specialty lumber
- Kiln Types
- Batch (track & package), Continuous, Dual Path (DPK)
- Energy
- Direct-fired, indirect thermal, steam, burner systems
- Controls
- PLC, HMI, automation, remote support
- Handling
- Fuel feed, conveying, lumber & package handling
- Coverage
- North America · 24/7 service dispatch
- Delivery
- Concept · Engineering · Build · Commissioning · Service
Ready to Engineer Your Next Kiln?
Send us your project scope or call Chad direct. We'll size the kiln, the burner, the steam loop, and the controls around your SYP production target — and stay with you through commissioning and service.