Adel, Georgia | Serving Clients NationwideTalk to Chad · 229-300-8099

Featured Projects

Work we've put our name on.

Kiln retrofits, fan wall rebuilds, plenum construction, fabrication, and facility builds — engineered, built, and installed by KilnTech crews.

Stainless interior flat liner panels installed across an industrial dry kiln wall

Kiln Service

Stainless Interior Liner Retrofit

Challenge: Corroded interior wall surfaces were shedding material into the charge and bleeding heat.
Solution: Full 304 stainless flat liner package fabricated to chamber dimensions and installed panel by panel.
Scope: Field measurement · Panel fabrication · Removal and installation

Stainless Interior Flat Liners

Kiln fan wall system with stainless liner panels and structural steel framing

Kiln Systems

Fan Wall & Liner System

Challenge: Uneven airflow was leaving one end of every charge under-dried.
Solution: Rebuilt fan wall with new shafts and bearings, plus stainless liner panels across the plenum face.
Scope: Fan wall fabrication · Shaft replacement · Liner installation

Continuous Kilns

304 stainless steel flat liners installed inside a central plenum kiln chamber

Kiln Systems

Central Chamber Liner Package

Challenge: Central plenum chamber surfaces were degrading under constant high humidity.
Solution: 304 stainless flat liners across the central chamber with sealed detailing at every joint.
Scope: Design · Fabrication · Installation

Central Plenum Kilns

Industrial dry kiln interior with structural framing and new stainless liner panels

Kiln Service

Dry Kiln Interior Rebuild

Challenge: An aging chamber needed structural and interior work before the next drying season.
Solution: Structural framing repair combined with a full interior liner replacement in one shutdown window.
Scope: Structural repair · Liner replacement · Shutdown execution

Kiln Maintenance & Repair

Steel plenum floor framing under construction at a dry kiln site

Construction

Plenum Floor Framing

Challenge: New kiln construction required plenum floor framing built to tight tolerance.
Solution: Shop-fabricated framing set and welded on site by KilnTech erection crews.
Scope: Fabrication · Erection · Alignment

Dry Kiln Construction

Kiln fan deck under construction with fans and structural supports

Construction

Fan Deck Construction

Challenge: Fan deck and support structure had to be installed without extending the outage.
Solution: Pre-fabricated deck sections staged off site and set in sequence during the shutdown.
Scope: Fabrication · Installation · Commissioning

Kiln System Installation

Fabricated steel slide gates installed at a lumber facility

Fabrication

Slide Gate Fabrication

Challenge: Worn gates were leaking air and could not be sourced from the original supplier.
Solution: New slide gates fabricated in-house to match the existing openings and hardware.
Scope: Field measurement · Fabrication · Installation

Kiln Replacement Parts

Custom industrial steel mezzanine installed inside a lumber facility

Fabrication

Industrial Mezzanine Install

Challenge: The mill needed added floor space over existing equipment without moving production.
Solution: Custom mezzanine engineered around the equipment footprint and erected in stages.
Scope: Engineering · Fabrication · Erection

Mezzanines & Platforms

Fabricated industrial steel stairs and handrail at a mill platform

Fabrication

Access Stairs & Handrail

Challenge: Existing access to the platform level was unsafe and out of standard.
Solution: New stairs, landings, and handrail field-measured and fabricated to fit the structure.
Scope: Field measurement · Fabrication · Installation

Stairs, Handrails & Ladders

Structural steel platform being erected at an industrial lumber facility

Construction

Structural Platform Erection

Challenge: Equipment upgrade required a new elevated structural platform.
Solution: Engineered platform fabricated and erected to support the new equipment loads.
Scope: Engineering · Fabrication · Erection

Structural Steel Erection

Heavy-duty insulated kiln walk door installed in a dry kiln wall

Kiln Service

Kiln Walk Door Replacement

Challenge: Failing walk doors were leaking heat and humidity out of the chamber.
Solution: New insulated walk doors with corrosion-resistant hardware and fresh seals.
Scope: Door fabrication · Hardware · Installation

Kiln Walk Doors

Sawmill facility under construction with structural steel and roofing

Construction

Sawmill Facility Build

Challenge: A growing operation needed new covered production and storage space.
Solution: Engineered steel building erected with foundations, roofing, and drainage as one contract.
Scope: Site work · Structural steel · Roofing

Sawmill Construction

Have a project like these?

Tell Chad what you're working on and we'll tell you honestly what it takes.

Call 229-300-8099 Request A Project Quote

Call 229-300-8099 Request Quote